78l05 схема включения

Datasheets

Sample &Buy ProductFolder TechnicalDocuments Support &Community Tools &Software ReferenceDesign LM341, LM78M05SNVS090F – MAY 2004 – REVISED DECEMBER 2016 LM341 and LM78M05 Series 3-Terminal 500-mA Positive Voltage Regulators1 Features 3 Description The LM341 and LM78M05 three-pin positive voltageregulators employ built-in current limiting, thermalshutdown, and safe-operating area protection, whichmakes them virtually immune to damage from outputoverloads. 1 Output Current in Excess of 0.5 ANo External ComponentsInternal Thermal Overload ProtectionInternal Short Circuit Current-LimitingOutput Transistor Safe-Area CompensationAvailable in 3-Pin TO-220, TO-252, and TOpackagesOutput Voltages of 5 V and 15 V With adequate heat sinking, they can deliver inexcess of 0.5-A output current. Typical applicationswould include local (on-card) regulators which caneliminate the noise and degraded performance …

Application Notes

• Datasheet advanced monolithic systems ams1117-1.8

  AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)

  PDF, 814 Кб, Версия: A, Файл опубликован: 6 май 2013The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t

• AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B)

  PDF, 300 Кб, Версия: B, Файл опубликован: 6 май 2013This application note discusses the operation and compensation of linear regulators.

• Digital Designer’s Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)

  PDF, 509 Кб, Версия: A, Файл опубликован: 4 июн 2008

• Understanding the Terms and Definitions of LDO Voltage Regulators

  PDF, 197 Кб, Файл опубликован: 21 окт 1999This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab

• Packaging Limits Range of Linear Regulators

  PDF, 75 Кб, Файл опубликован: 8 май 2010The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.

• A Topical Index of TI LDO Application Notes (Rev. F)

  PDF, 82 Кб, Версия: F, Файл опубликован: 27 июн 2019

Datasheets

Sample &Buy ProductFolder TechnicalDocuments Support &Community Tools &Software ReferenceDesign LM341, LM78M05SNVS090F – MAY 2004 – REVISED DECEMBER 2016 LM341 and LM78M05 Series 3-Terminal 500-mA Positive Voltage Regulators1 Features 3 Description The LM341 and LM78M05 three-pin positive voltageregulators employ built-in current limiting, thermalshutdown, and safe-operating area protection, whichmakes them virtually immune to damage from outputoverloads. 1 Output Current in Excess of 0.5 ANo External ComponentsInternal Thermal Overload ProtectionInternal Short Circuit Current-LimitingOutput Transistor Safe-Area CompensationAvailable in 3-Pin TO-220, TO-252, and TOpackagesOutput Voltages of 5 V and 15 V With adequate heat sinking, they can deliver inexcess of 0.5-A output current. Typical applicationswould include local (on-card) regulators which caneliminate the noise and degraded performance …